Ceramic Heater (Convector on Wheels) TEPLOCERAMIC TC1000DR Beige

CERAMIC ELECTRIC CONVECTOR HEATER
Two-sided on wheels with digital thermostat
Dimensions: 60x60x8 cm Power: 1000 W - heats up to 18 m²
Consumption: 0 - 1 kW per hour depending on settings
Ceramic temperature adjustment: 40-95°C
Room temperature adjustment: 5-35°C
Warranty - 5 years from the date of manufacture

DESCRIPTION:
The TEPLOCERAMIC TC1000DR heater by TEPLOCERAMIC is a new type of heater - a ceramic convector with a built-in digital thermostat. It combines the advantages of a ceramic panel and a convector-type heater. The power of this model is 1000W, and it is designed to heat 9-18 m² (depending on room insulation). The heater is made of two panels of eco-friendly ceramic granite 60x60 cm, located on both sides of a convective metal casing. The heater comes with a 260 cm power cord and wheels, which are included in the price. You can set the built-in thermostat to maintain the desired room temperature (from 5°C to 35°C). The sensor measures the coldest air in the room under the heater at floor level (not the warm air near the heater) and automatically turns off the heater when the room temperature reaches the set point. When the room temperature drops slightly, the heater starts heating again. You can also set the front ceramic temperature, which can be left unchanged (the default is a safe 80°C).

PRINCIPLE OF OPERATION:
An insulated heating cable with a temperature that does not dry out the air or burn oxygen in it heats the ceramic. The front part of the ceramic granite panel emits soft and comfortable heat from the heated stone and also heats the air in the room, while its rear part heats the air inside the metal convector-type casing. A powerful heat flow rises through the slots in the upper part of the heater casing, and cold air is drawn in through the slots in the lower part. This creates a thermal convection air flow that quickly and evenly warms the room. The heater can run continuously and does not need to be unplugged. If you turn it off or if there is a power outage, it will remember the settings and resume operation in the set mode once power is restored. The device is fire-safe and absolutely safe for health. The heater is very easy to use, quickly and easily installed, and requires no maintenance.